Liquid Chlorine, Dry Gas Chlorine , HCL, Fluorine Pyrophoric Media, Hydrogen Fluoride, Phosgene, Nitrogen Trifluoride, Cat M Fluids as per ASME B 31.3

Electric and Pneumatic valves actuated according to GEST • Complete valve in Hastelloy C / CY40 / 904L / 317LMN Other MOC available on request

Standard – Euro Chlor GEST 06/318 Unit – °C Temperature Low Carbon Steel – -40 to 120

Approved by Euro Chlor GEST 06/318 certificate no. 17/01 • In compliance to The Chlorine Institute Pamphlet 6 • Fugitive Emission Type Tested as per ISO 15848 Part 1 • Quality Management System as per ISO 9001-2015

Class 300 and PN 40. Lower and Higher class rating available on request

DN 25, 40, 50, 80, 100, 150 NB 1”, 1 ½”, 2”, 3”, 4”, 6” Higher sizes are available on request

Flanged Ends to ASME B16.5 / EN 1092-1 & PN 40

Certification as per EN10204 Type 3.1 for Body / Bonnet, internals and Impact Test Certification

Impact requirements for Low Carbon Steel meets 27J as per recommendations of Euro Chlor. • Multiply bellow in Hastelloy C276

Protected bellows design from hazardous and corrosive media to extend bellow life High stem finish to surface finish 0.4µ Ra

• Oven drying of valves before dispatch to a minimum of 120 degree Celsius.
• Drying agents such as Silica Gels used into the valv

 BELL-O-SEAL